Search
Search Only:

Search Keyword DSL502T

Total: 8 results found.

As mentioned elsewhere the TNC we use in the Igates is based on the ATMega8 based TNC design from Henry Carl Ott (N2RVQ). For those interested in constructing their own here is the schematic  ...
... stages of boot. Flashing = Could not find a configuration file for this unit at http://www.qsl.net/zl1vkaprs/dsl502t.  The configuration files are named with the Ethernet MAC Address ...
... Linux” ISO.     2.  To program the DSL502T the PERL and CURL software in the “Damn Small Linux” image needs to be updated Start ...
In addition to configuring the DLink DSL-502T routers for the IGate project we also needed a TNC to connect between the radio and the serial port. Our TNC selection was based on the following criteria: ...
When building OpenWRT Kamikaze 8.09.2 for the DSL502T there are a number of mobiles included by default that are important if you are using the device as a modem but unnecessary if you plan to use the ...
Ubuntu 8.1 works really well as a build environment for OpenWRT and programming environment for the DSL502T.  I have found that to make OpenWRT a network connection with Internet access is required but ...
At the top of the hill on my rural property is a bore that provides stock water for my stock and three neighboring properties. So what does this have to do with DLink DSL502T routers, Ruby, Webrick ...
This project came about because a group of amateur radio operators in Auckland wanted to improve the APRS receive coverage by using IGates to add receive only coverage around South Auckland. We ...

Powered by Easytagcloud v2.1

Contact Andrew Quinn

jaquinn@ihug.co.nz http://twitter.com/jaquinn