Skip to content
Skip to main navigation
Skip to first column
Skip to second column
JAQ's Blog - Electronics, Microcontrollers, DEC Minicomputers, Raspberry Pi, Airplanes and other stuff....
Total: 9 results found.
Who is using the water?... the bore monitor speaks
... These worked really well in the
application so I wrote a Ruby application that monitors the IR sensor via a GPIO pin on the DSL and provides a browser based summary of the last 30 days activity. ...
Building a DLink DSL-502T Based IGate - TNC Schematic and Firmware
As mentioned elsewhere the TNC we use in the Igates is based on the ATMega8 based TNC design from Henry Carl Ott (N2RVQ). For those interested in constructing their own here is the schematic ...
DSL-502T IGate Front Panel LEDs
... that will allocate an address. On = Network running and IP address correctly assigned. The USB/
D LED has three states: Off = Only during the initial ...
Programming the DSL-502T IGate using “Damn Small Linux”
Items you need to get started: 1. The “Damn Small Linux” ISO from http://distro.ibiblio.org/pub/linux/distributions/damnsmall/current/current.iso burn to a CD (approx ...
Building a DLink DSL-502T Based IGate - The TNC
D We found the ATMega8 based TNC design from Henry Carl Ott (N2RVQ) which at first glance addressed the requirements and a prototype was built and tested. In comparative testing of ...
Building OpenWRT for DSL502T Appliances - Removing Modules
When building OpenWRT Kamikaze 8.09.2 for the DSL502T there are a number of mobiles included by default that are important if you are using the device as a modem but unnecessary if you plan to use the ...
Building a DLink DSL-502T Based IGate
This project came about because a group of amateur radio operators in Auckland wanted to improve the
receive coverage by using IGates to add receive only coverage around South Auckland. We ...
APRS in an Ammunition Can
... a self contained
unit. There was plenty of enthusiasm for the project.... so much so that we ran out of PCB's.... so I built my OpenTracker using a DSE Prototyping board... a little more time ...
(Web Links / My Other Sites)
DSL-502T based IGate network
PDP8 SBC6120 FP6120
My Other Sites
Contact Andrew Quinn